Noctua NA-FC1 Fan Controller 950.- est. delivery in 2-4 days Key Specifications Fan ControllerSupport 3 x 4-pin FansPWM based controlManual control mode“No stop” mode Customising motherboard fan controlPower supply adaptor SKU:#066269 Warranty6 Years by Noctua Product No.:NA-FC1 Short link:http://i.nvade.it/heR See specifications from the manufacturer Description Specifications The NA-FC1 is a compact, highly flexible controller for 4-pin PWM fans that can both work on its own for manual speed reduction and also work in tandem with the automatic motherboard fan control. By adjusting the NA-FC1’s speed control dial, users can either manually set a PWM duty cycle from 0 to 100% or reduce the PWM duty cycle supplied by PC motherboards in order to have the fans running slower than the automatic motherboard fan control would allow. While the brightness of the orange status LED provides visual feedback on the current dial setting, the push button allows the NA-FC1 to be switched into “no stop” mode, which prevents the fan from falling below a speed of 300rpm. Thanks to the supplied 3-way split cable and power supply adaptor, up to 3 fans can be controlled simultaneously. PWM based control While most fan controllers are voltage based, the NA-FC1 uses the more sophisticated Pulse Width Modulation (PWM) technique that allows for more efficient control and lower minimum speeds, regardless of the fan’s starting voltage. Manual control mode If the NA-FC1 doesn’t receive an input PWM signal from the motherboard, it works as a simple and efficient manual controller that allows the duty cycle to be set from 0 to 100%. This makes it ideal for manually slowing down high-speed PWM fans such as Noctua’s industrialPPC series in order to achieve consistently quiet operation. Customising motherboard fan control Many motherboards provide insufficient options to customise automatic fan control or simply don’t go below certain duty cycles and speed levels. Using the NA-FC1, you can lower the motherboard’s PWM control curve in order to achieve truly silent operation, even with high-speed PWM fans such as Noctua’s industrialPPC series. Warranty Warranty 6 Years by Noctua
Noctua NA-FH1 8 Channel Fan Hub 8 x PWM Fans SupportSuitable for 12V and 5V fansUp to 54W via S-ATAUp to 24W via 4-pinCompatible with 4-pin PWM and 3-pin fansEasy installation with magnets30cm input cable included 1,450.- See more Stock Status: est. delivery in 2-4 days
SilverStone LSB02-E Fan and RGB Controller 6 x 4-1pin | 4 x 4pinRemote start or turn off PCRemote control light colorAutomatically detect temperature changes 1,590.- See more Stock Status: In stock - est. delivery in 1-2 days
Aqua Computer QUADRO fan controller for PWM fans 4-Pin connector and PWM controlledRGBpx LED output for LED stripsQUADRO controllerFour temperature sensor inputs 1,950.- See more Stock Status: est. delivery in 2-4 days