Back
  1. Networking
  2. Wired Networking

TP-LINK TL-SG1016D 16-Port Gigabit Desktop/Rackmount Switch

2,290.-
est. delivery in 2-4 days
Key Specifications

  • 16 x 10/100/1000Mbps RJ45

  • IEEE 802.3x Flow Control

SKU:#022112 Product No.:TL-SG1016D Short link:http://i.nvade.it/5KE See specifications from the manufacturer

Warranty Lifetime by TP-LINK


The TL-SG1016D 16-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1016D can save up to 40% of the power consumption, making it an eco-friendly solution for your business network.

Gigabit Switch
Featured with 16 10/100/1000Mbps ports, TL-SG1016D greatly expands your network capacity, enabling instant large files transferring. So，power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.

GO GREEN WITH YOUR ETHERNET
You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1016D 16-Port Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.

Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1016D can automatically detect the link status of each port and reduce the power consumption of ports that are idle.

Power Budget According to Cable Length
Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG1016D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.

Easy to Use
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.

Features
- Innovative energy-efficient technology saves power up to 40%;
- Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode;
- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput;
- 32Gbps Switching Capacity;
- 10K Jumbo frame improves performance of large data transfers;
- Auto-MDI/MDIX eliminates the need for crossover cables;
- Supports MAC address auto-learning and auto-aging;
- Store and forward Switching scheme;
- Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware;
- Desktop and Rack-mountable design;
- Plug and Play design simplifies installation.

Management features

Switch typeUnmanaged
Switch layerL2
Quality of Service (QoS) supportYes

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity16
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Installed SFP modules quantity0
Installed SFP+ modules quantity0
Power connectorDC-in jack

Network

Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
10G supportNo
Port mirroringYes
Full duplexYes
Flow control supportYes
Link aggregationYes
Broadcast storm controlYes
Rate limitingYes
Auto MDI/MDI-XYes
VLAN supportYes
Number of VLANs32

Data transmission

MAC address table8000 entries
Switching capacity32 Gbit/s
Throughput23.08 Mpps
Store-and-forwardYes
Number of queues4
Jumbo frames supportYes
Jumbo frames9000
Packet buffer memory0.5 MB

Security

IGMP snoopingYes

Design

Rack mountingYes
Product colourBlack
LED indicatorsYes

Power

Power supply includedYes
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)11.73 W

Power over Ethernet (PoE)

Power over Ethernet (PoE)No

Operational conditions

Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90%
Storage relative humidity (H-H)5 - 90%

Weight & dimensions

Width294 mm
Depth180 mm
Height44 mm

Packaging content

Cables includedAC
User guideYes
Rack mount kitYes

Certificates

CertificationFCC, CE, RoHS

Logistics data

Harmonized System (HS) code85176990
Others looked at

  • Linksys High Power PoE Injector for Business (LACPI30)

  • For Indoor Use Only
  • Transfers at Gigabit Ethernet Speeds
  • 5 Gigabit Ethernet Auto-Sensing Ports
  • 1 Data/PoE Port
  • 1 Data Port
  • Quality of Service (QoS) Prioritization
  • IEEE 802.at and IEEE 802.af Supported
  • Access Points and IP Cameras Supported
  • Up to 328' Range
  • Up to 30W at 10/100 Mbps via CAT5
    • 2,350.-
    See more
    Stock Status: est. delivery in 2-4 days

  • Tenda M3 Access Point Controller

  • 5 x Gigabit Ethernet Network
  • AP Automatically Discover
  • AP and User Status Monitor
  • Plug and Play / Centralized Management
    • 2,590.-
    See more
    Stock Status: est. delivery in 2-4 days